Today, the whole country is advocating artisan spirit, which means that this kind of craftsman is becoming more and more popular in numerical control industry, and the development prospect of NC industry is getting better and better. But why do young people no longer like to engage in the mechanical processing industry? Young people nowadays are getting farther and farther from this industry......

Recently, someone posted on a mechanical Forum：

Fewer and fewer young people feel engaged in machining. A lot of apprentices in the factory can't do it for a few days, and there's very little left. The company is a lot of manpower shortage, is not now people do not like mechanical manufacturing?

So caused users to resonate, to each one airs his own views:

Net friend @江左盟宗主苏：I contact mechanical processing from 06 years, the mold industry, then the workers don't have much money, salary 800, so we generally considered the primary is general two times the bottom bar, then also called technician, and now this line with general almost no profit, low wages rise, NC too much, now the name of this grinder, milling, wire cutting,...... From this name will know that the industry declined, dirty and tired, and a little dangerous, fewer girls, no chance to find a girlfriend.

Net friend@再见苍老师：

As a mold related personnel, I have to say, in fact, this industry dirty tired, wages than some general strong circle of people, the general quality is low. A machine I don't know, it is said that some of the numerical control machine tool factory can give to 6000-9000, this is the current market, but you have to do five years to eight years, and mould maintenance personnel salary range in 6000-12000, but also to more than five years of experience. And we still have continuous high-speed, sophisticated, complex mold, have the opportunity to get this treatment, basically, the current market situation, master and design will not bring new people, only with acquaintances or relatives. If your ability is good, the die factory is not very tired in the general precision. If the design of the mold is not good, or the requirement is very high, that will definitely kill you. Many companies are very deep water, parts processing is not in place, the quality of the material does not work, you will die. So people in this industry will push you into a temper. Leaders also cock fried days, anyway, I do not love, if not because I don't want to be with relatives, however, I was lucky, in just three years, get the 6500-7000 salary, this is someone with a difference. I don't love big company, have too many idlers, the key is that they are very cock, right, people make you unhappy, so I was very disappointed for this industry, but was reluctant to abandon such. I'm going to do a small company, in addition to the boss, but also look forward to, at least I do the boss may have developed, I developed a natural treatment will be better, the following are the basic manufacturers!

Net friend @大家的奋斗：

I die design and manufacturing, 42 people in the class, sophomore summer into a mold factory part-time, a SB put the block in the guide column, 800T ah, directly to the iron pillar smashed, a fly the right chest, sent directly to the hospital 21 sewing needle, another arm. Hit numb, o.k.be. Later, the internship went to the processing center to do, a fixture did not clamp, the workpiece flew out directly hit the chest, when the entire direct Meng forced, scared to death, but fortunately the speed is not. At the time that a new lease of life. Resigned。 Main cause：

1., social groups are too low, are factories, affecting vision patterns;

2., the salary is too low, too tough, too dangerous at the same time, will often work overtime, occasionally night shift. Resignation without regret, without hesitation.

Net friend@Mia3886971：

I entered the line 06 years, mold design and manufacturing, before the entry, the mold industry is particularly popular, feel casual, others can 5000+ a month, 06 years, 5000 per month, or quite enough. * * * after the discovery, the single machine is CNC, electrical machinery, integrated automation and so on many classification, I this professional design class did not mean that 10 years after graduation in a private mold factory as an apprentice, a monthly salary of 800 to 1000, what do not understand to ask the boss, the boss knows, including design problems, in the dry year than the school 3 years more. After three years of preparation for the job, generally requires high wages, engaged in the design of what eight years of working experience, fluent in English, how many years of management experience, the vast majority are around 4000, this three shifts. Around a lot of young men is Ershisanershisi years old, the family has to marry, the problem is the industry which has so many girl contact. Now in a big company for three years, just to get by, advise you want to do this line of machinery, willing to endure hardship, the hungry for you, if you want to make big money, or take a fifteen to twenty years of work experience, either on their own factory.

Net friend@小锋a：

I am a lathe, CNC lathe. Take me for example. I've been working on it for nearly 14 years. I bought my own machine in Beijing for the past few years. When I work, I haven't earned any money, and I haven't saved enough money. Now I have been working for four or five years, mainly for some companies to do processing, but also do some second-hand life. With excellent technical and military origin, has not been idle, but for so many years, the hand has been no money, and sometimes checkout can not keep up, but also often worried about life?!

Alas, the main processing costs have not gone up, and sometimes even down, prices are rising, wages are rising, and now the profit margins in the middle is already very small. Another is the checkout cycle is particularly long, now which link is dragging accounts, and then the vicious circle.

In a word, the real economy is becoming more and more difficult now!

Net friend@家居天下：

I major in electrical automation, up nearly ten years before I finally got a mechanic and electrical engineer title, electrical and mechanical professional inseparable, are basically the same job, and want to have a future, must be able to endure hardship from practice experience.

The reason why we don't like the industry is probably the following:

1、Low wages

Many students, especially boys, all love daily mechanical and electrical and electronic specialty, is a personal hobby, two is more suitable for boys, which leads to the recruitment of graduates is very easy, natural, wages will be relatively low. In fact, another reason for the low salary is that the job content is small and the appearance seems easier. But in fact, the technical content is very deep, and sometimes it is not easy.

2、Impatient

After a short time wages, most employees feel their work is dirty and tired is not to make money, gradually away from this post, the original "engineer" from the dream ended, in fact, until this step is a long and arduous process.

3、Work tired

This is a professional, contact processing, manufacturing equipment, such as lathe, welding, casting the intermediate frequency furnace, are particularly dirty tired work. Moreover, the foundation is a major barrier.

So, a lot of people can't wait until the first hurdle and then give up.

Net friend @梁Kq：

I worked in the machine factory, specialized in the production of die casting machine, milling workpiece was open, overweight, with a forklift fork carriage, precision requirements are very strict, each job has to drag table runout is less than 0.1mm, to use the electronic ruler indexing, boring, tapping the largest 1 inch, the workpiece is complex, not the heart a distraction, will make a mistake in case of an error, wages are not enough work worth, never clean hands, even after the new year wages are not leave.

Net friend @心如大海a：

Do the mechanical technology of high wages, no real technology is low, such as dead wages will Turner three thousand pieces of it, if you will die repair and adjustmentTry to deal with some problems of assembly of the die, it is the master, our factory has to take twenty thousand, take seven thousand or eight thousand many, if no technology on the one thousand or two thousand, because what you are not, can not create value, what other people give you so high. As for the office must have that year covers, six thousand or seven thousand is also a lot of office apprentice is two thousand or three thousand, a little higher than the workshop, after all, Diploma in there.

Small series of engineering graduates, and now engaged in the professional students have few, mostly turned to civil servants, IT Internet industry to go. Machinery is a need to precipitation professional, bitter tired dirty is very normal thing, without extraordinary perseverance is impossible to adhere to, and has been struggling for the first line of machinery people, to pay tribute to you!